PLEASE NOTE THE FOLLOWING CHANGES IN DATA STRUCTURE(AS OF 1/1/2006): 1. Nutrient availability is now reported in parts per million (ppm) instead of Lbs/A. 2. Parts per Million (ppm) can be converted to lb/A by multilpying by 2. HOW TO FIND YOUR SAMPLE DATA: 1. Click on Edit on your browsers menu bar. 2. Select the Find option and enter your starting sample number in the box. 3. When you have located your samples, place your cursor at the beginning of the line of the first sample and highlight all of your samples by either holding down your left mouse button and dragging the cursor down the list of your samples, or hold down the Shift key and use the down arrow key to highlight your samples. 4. After you have highlighted all of your samples, again click on Edit and click on the Copy option. 5. Minimize your browser with the - button in the upper right-hand corner. 6. Run NotePad or WordPad from your Windows Accessories Menu. 7. Click on Edit on the NotePad or WordPad menu bar and then click on the Paste option. 8. After you have pasted your samples into NotePad or WordPad, click on File on the menu bar and then click on the SaveAs option and enter the filename in which you wish to save the data. 9. Close your browser and use the data as you will. 10. Please note that the units on EC have changed from umhos/cm to uS/cm (microsiemens/cm). These are identical units. |uS |meq | |per |per | |-----------------------ppm (parts per million)-------------------------| |cm |100g| SampNo|_pH_|__P__|__K__|_Ca__|_Mg__|_Na__|__S__|_Fe__|_Mn__|_Cu__|_Zn__|__N__|__B__|_%OM|_EC__|CEC_|Crop1|Cnty|